Changing the Jumper Settings

If you need to change any jumper settings, follow these steps:

1.Remove any option cards that may be blocking your access to the jumpers. See page 6-12 for instructions.

2.Change the jumper settings as necessary according to the tables above.

To move a jumper from one position to the other, use needle-nose pliers or tweezers to pull it off its pins and gently move it to the desired position. Be careful not to lose the jumper.

Caution

Be careful not to bend the jumper pins or damage any surrounding components on the main system board.

3.Replace any option cards you removed. See “Installing an Option Card,” below.

4.Follow the instructions in Chapter 5 to replace the computer’s cover.

Installing and Removing Options 6 - 7