If you have forgotten your password and you do not want to set a new one, there are two ways to remove the current password:
tl Disable the existing password
Q Disable the password function.
To do either of these procedures, you must reset a jumper on the main system board.
| If you are using network server mode and you remove the |
|
| password, the computer automatically turns off network |
|
I | . | , |
You should disable the existing password if you want to be able to set a new password later without having to reset a jumper. See “Disabling an existing password,” below, for instructions.
If you disable the password function, you cannot set a new password unless you disable the existing password at that time. If you do not want to use a password anymore, follow the instructions under “Disabling the password function” below.
Disabling an existing password
If you do not know your
1.Turn off the computer. Then follow the instructions under “Changing the Jumper Settings” in Chapter 6 to disable the password function by setting jumper JP5 to position A.
Troubleshooting