After printing the error message, the program displays this prompt:
P r i n t o u t i s f i n i s h e d . Press ENTER to return to the menu.
The program continues after an error in one of the following ways:
Q It returns to the Device List
0If you are running multiple tests and are not terminating on an error, the program repeats the test that caused the error.
The table below lists the tests you can run on your system. You may not see all of the tests listed when you run System diagnostics; some tests appear only if you have installed the device.
Tests that check the operation of parallel or serial ports require you to use a special connector in order to test the port. Contact your dealer to obtain the connector.
For a complete list of the error messages these tests may display, see the table at the end of this appendix.
System diagnostics tests
Device | Tests available | Description |
|
|
|
System board |
| Checks the |
|
| microprocessor |
|
|
|
Memory |
| Checks all memory and |
|
| displays a memory |
|
| count |
|
|
|
Keyboard |
| Tests all keys on the |
|
| keyboard |
|
|
|