You can use the backspace key to make corrections. When the time is correct, press [Enter. If you enter an invalid time-for example, a number greater than 23 for the hours or greater than 59 for the minutes or seconds-the computer ignores your entry. Try again.

5.To set or change the date, highlight Date and press IEnter You see this template:

mm-dd-yyyy

-

(“mm” stands for month, “dd” stands for day, and “yyyy” stands for year.)

6.Enter the date in the exact format shown in the box. Use two digits for the month and day and four digits for the year; the Setup program automatically inserts the hyphens (-). For example, to set the date for March 29,1992, you would type the following:

03291992

You can use the backspace key to make corrections. When the date is correct, press IEnter If you enter an invalid date-for example, a number greater than 12 for the month or greater than the number of days in that month-the computer ignores your entry. Try again.

7.Press ? once or twice to return to the main Setup menu.

Note

The Setup program automatically saves the time and date when you press m after typing each one. If you then exit the Setup program without saving your changes, the new time and date still take effect.

Running the Setup Program 2-19