Setting the Hard Disk Drive Configuration

If your computer came with a factory-installed hard disk, your hard disk configuration has already been set and you can skip this section.

If you installed or removed a hard disk, follow these steps to set the computer’s hard disk configuration:

1.At the main menu, highlight Hard disk drive. Your current settings appear, such as the following:

Drive 1: Type 34

Drive 2: None

The Type number indicates the type of hard disk installed in your computer. See your hard disk documentation for the correct drive type number or for a list of the drive’s parameters which you can use to identify the drive type number. Then consult the Hard disk drive types table on page 2-24 for a list of the types you can use in your computer.

The None following Drive 2 : indicates that there is no second hard disk.

If the displayed settings match your hard disk configuration, skip the rest of this section.

If a setting is incorrect, or if you want more details about your hard disk configuration, go to step 2.

2-20 Running the Setup Program