4.After you highlight the appropriate display adapter type, press IEnter The screen displays your new setting.

5.Highlight *** SAVE SETTING *** and press CEnter] to return to the main Setup menu.

Setting the Power-on Password

A power-on password is an optional feature that lets you control who can access your system. If you do not want to set a password, skip this section.

Once you set a power-on password, you must enter it at the key prompt ( h ) every time you turn on or reset your computer. If you do not enter it correctly, you cannot access your system.

If you want to use your computer as a network server, you can set your password to operate in network server mode. (See “Using Your Computer as a Network Server” in Chapter 4 for more information.)

Follow these steps to set a power-on password and turn on network server mode (if necessary):

1.At the main Setup menu, highlight Password. This submenu appears:

Power-on password

Network server mode OFF

2.Press IEnter The cursor block moves to Power-on password.

3.Press IEnter The cursor block moves to an empty box.

Running the Setup Program 2-9