Note
If a password already exists, this message appears:
The Setup program does not allow you to enter a new password if you have already set one. However, you can easily change or delete the current password if you know it. See “Using a
4.To enter a password, type any combination of characters (including letters, numbers, and blank spaces) up to a total of seven characters. You can use the backspace key to delete mistakes.
Do not use characters requiring the m key, such as $, @, or * in your password. The computer does not recognize the m key when you use your password to access the system.
Caution
Be sure to remember the password you enter or write it down and keep it in a safe place. If you cannot remember your password, you will not be able to access the computer the next time you turn it on.
If you want to return to the password submenu without saving any changes, press I.
5.After you enter a password, press [Enter] to return to the password submenu.