2.Press IEnter You see a menu such as the following:
Drive | 1: | Type 34 |
| Drive | 2: | None |
Number | of | cylinders | 723 | Number | of | cylinders |
Nunher | of | heads | 13 | Number | of | heads |
Number | of | sectors | 51 | Number | of | sectors |
Precomp. | cylinder | O F F F F | Precomp. | cylinder |
Landing | zone | 722 | Landing | zone |
Total capacity (MB) | 234.06 | Total capacity (MB) | ||
The menu lists the settings you can change for each drive: the number of cylinders, the number of read/write heads, the number of sectors, the precompensation cylinder, and the landing zone (the cylinder on which you park the heads when moving the computer). It also displays the total storage capacity in megabytes.
3.If you want to change the settings for drive 1 (which is drive C on most computers), press IEnter] to highlight Drive 1:. If you want to change the settings for drive 2, press m and then + to highlight Drive 2 : .
4.Press m again. You see this submenu:
None
T y p e 3 4
User defined
Running the Setup Program