Installing Option Cards
Follow these steps to install an option card:
1.If you are installing an option card that controls a mouse, you need to change the setting of jumper JP7 before you install the card. If you install a display adapter card, you may need to change the settings of jumpers JP4 and JP6. If this is the case, see page
2.Remove the retaining screw from the top of the metal option slot cover; hold on to the screw so it doesn’t fall into the computer. Lift out the slot cover.
?
Keep the screw to secure the option card to the computer. Store the slot cover in a safe place in case you remove the option card later.