Installing or Removing a Drive in the External Bay

This section describes how to install or remove an Epson diskette drive; however, you can use these instructions to install or remove another type of storage device. See the manual that came with it for additional installation instructions.

Installing a Drive

On each interior side of the external drive bay, there is a plastic guide with four support grooves, as shown below. You select the appropriate grooves for your drive depending on the size of your drive and where you want to locate it.

third-height drive

I half-height drive

The third-height diskette drive that comes with your computer is installed in the grooves at the top of the bay.

Note

If you are installing a 3M-inch drive that does not have a 5Winch mounting frame installed on it, follow the instructions that came with the drive to install the frame.

7-6 Installing and Removing Drives