If the list correctly describes your system, highlight Y and press IEnter If a device is missing from this list, or if you want to change the list, press [Nl or + and IEnter Then see “Modifying the Device List” on page C-5.
Note
If your system uses the built-in VGA adapter or an EGA or VGA card with a color monitor, your device list should include item 5, Color graphics adapter and CRT. If your system uses the built-in VGA adapter or an EGA or VGA card with a monochrome monitor, your device list should include item 4, Monochrome display adapter and CRT.
After you confirm the Device List, you can test only those items. If you want to add a device later, return to the Operation Menu and reselect System diagnostics.
Note
After you install MS-DOS or another operating system, you should always boot the computer from your hard disk or from the system diskette to use it. When you finish running System diagnostics, remove the Reference diskette from drive A. If you do not have a hard disk, insert the system diskette. Then reset your computer to make sure it performs all the commands in the CONFIG.SYS and AUTOEXEC.BAT files.
Performing System Diagnostics C-3