Follow these steps to set the real-time clock:

1.At the main menu, highlight Real-time clock. If the time and date have been previously set, the current settings appear:

Time

0 9 : 1 6 : 5 2

Date

03-29-1992

If the time and date are correct, you can skip the rest of this section.

If the time and date are incorrect, go to step 2 below.

If the time and date have never been set, the submenu contains a template for you to fill in:

Time x x : x x : x x

Date x x - x x - x x x x

2.Press m to move the cursor block into the submenu.

3.To set or change the time, press m again. You see this template:

hh:mm:ss

(“hh” stands for hours, “mm” stands for minutes, and “ss” stands for seconds.)

4.Using a 24-hour clock, enter the time in the exact format shown in the box. Type two digits for each part; the Setup program automatically inserts the colons (:). For example, to set the time to 1:30 p.m., you would type the following:

1 3 3 0 0 0

2-18 Running the Setup Program