Memory Module Problems

If you added extra memory to your system by installing SIMMs and that memory is not operating properly, check the following:

1.Check to make sure that you set the memory configuration jumpers (JP8 through JP14) correctly and that they match your current SIMM configuration. See Chapter 6 for instructions on setting memory jumpers.

2.If the jumpers are set correctly but the memory count displayed by the power-on diagnostics program is incorrect, you or your dealer may not have installed the SIMMs correctly. They may be installed in the wrong sockets, they may be the wrong type of SIMM, or they may not be inserted all the way. (Keep in mind that the memory count does not include the 384KB of memory between 640KB and 1MB.)

If your dealer installed the SIMMs for you, contact your dealer; do not attempt to correct the problem yourself. If you installed the SIMMs, see “Memory Modules” in Chapter 6 and make sure you have followed all the instructions properly.

3.Be sure to run the Setup program after you install or remove memory modules to automatically update your memory configuration. See Chapter 2 for instructions.

If you still have trouble with your SIMMs, write down any error messages that appear and contact your dealer.

Troubleshooting B - 2 9