7.You may have entered an incorrect diskette drive type when you ran the Setup program. Run the Setup program again to check the setting. See Chapter 2 for instructions.
8.Did you receive one of the following
Ll Disk Drive Error: Abort, Ignore, Retry?
Cl Disk error reading drive d: D Disk error writing drive d:
If you see one of these messages, make sure the diskette is properly inserted in the drive and then try the operation again. If the problem persists, try removing the diskette and reinserting it.
If the error message still occurs, you may have a defective diskette. Use the COPY command to copy the files from the bad diskette to a new diskette.
9.If you see no error messages but there is something wrong with the data in a file, the operating system or an application program may have updated the storage information on the diskette incorrectly. This is probably the case if you have one of these problems:
Lt Part of a file is missing
Ll A file includes parts of other files Cl An expected output file is missing.
Use CHKDSK to make the necessary repairs; see your
B - 1 8 Troubleshooting