For some devices, the computer does not display a submenu of tests to choose from. Instead, it performs all the tests that do not require you to enter a response. If you chose to test the device more than once, the computer runs all the tests and then repeats them in the same order.
You may see this message on the screen during the tests:
On errors, press any key to stop
If you see an error while one of the tests is running, press any key to terminate the test.
Resuming From an ErrorIf an error occurs during a test, the test stops at that point, and an error message appears. If you want to record the problem, you can print the message using your printer. You see this prompt:
Do you want a printout of the error message(s) ? (Y/N)
To continue without printing the error message, select N.
Before you request a printout, be sure your printer is ready and contains paper. Then select Y. If the printer is not ready, the following message and prompt appear:
Printer is not installed correctly.
Install correctly before entering.
Continue ? (Y/N)
Correct the problem and select Y to continue printing, or select
Nto cancel printing.
Performing System Diagnostics | C - 7 |