3.You can raise the keyboard by adjusting the legs on the bottom. To change the angle of the keyboard, turn it over and flip each leg upward until it locks into place, as shown below.

recessed tab

If you want to lower the keyboard, press down on the recessed tab (labelled L or R) and lower the leg into the slot.

6 Connecting the Mouse

Your computer has an auxiliary port for an IBM PS/2 compatible mouse that uses a miniature DIN (6-pin) connector. If your mouse has this type of connector, you can connect it to the built-in port on your computer.

Note

If you have a mouse that requires a different interface port, you can connect it to the built-in serial port or install an option card to provide the interface. You also need to change the setting of jumper JP7 inside the computer. See Chapter 6 for instructions or ask your dealer for assistance.

Setting Up Your System 1-11