Setting the Diskette Drive Type(s)

Your system probably came with one factory-installed diskette drive. If you added a second diskette drive or removed one, you may need to change the diskette drive settings to match your configuration. If you haven’t made any changes, you can verify your drive type settings. Follow these steps:

1.At the main menu, highlight Diskette drive. The current settings appear:

Drive A: 1.44 MB

Drive B: None

If the diskette drive types on the screen match your diskette drive configuration, you can skip the rest of this section.

2.To change a setting, press IEnter The cursor block moves into the diskette drive submenu and you see the following:

Not installed 360 KB drive

720 KB drive (3.5")

1.2 MB drive

1.44 MB drive (3.5")

You also see themessage Selected drive light is ON. This tells you that the light on the diskette drive currently selected is on.

3.If you want to change the drive A settings, make sure

Drive A: is highlighted and press 25Enter . If you want to

change the drive B settings, highlight Drive B : and press CEnter The cursor block moves into the submenu.

Running the Setup Program 2 - 2 7