Epson T88III specifications Esc L

Confidential

ESC L

[Name]	Select page mode
[Format]	ASCII	ESC	L
	Hex	1B	4C
	Decimal	27	76

[Description] Switches from standard mode to page mode.

[Details]	• This command is enabled only when processed at the beginning of a line in standard mode.
	• This command has no effect in page mode.
	• After printing by FF is completed or by using ESC S, the printer returns to standard mode.
	• This command sets the position where data is buffered to the position specified by ESC T
	within the printing area defined by ESC W.
	• This command switches the settings for the following commands (in which the values can be
	set independently in standard mode and page mode) to those for page mode:
	① Set right-side character spacing: ESC SP, FS S
	② Select default line spacing: ESC 2, ESC 3
	• Only valve settings is possible for the following commands in page mode; these commands
	are not executed.
	① Turn 90° clockwise rotation mode on/off: ESC V
	② Select justification: ESC a
	③ Turn upside-down printing mode on/off: ESC {
	④ Set left margin: GS L
	⑤ Set printable area width: GS W
	• The following command is ignored in page mode:
	➀ Execute test print: GS ( A
	• The following command is not available in page mode:
	① Print NV bit image: FS p
	② Define NV bit image: FS q
	➂ Write to NV user memory: FS g 1
	➃ Print raster bit image: GS v 0
	• The printer returns to standard mode when power is turned on, the printer is reset, or
	ESC @ is used.

[Reference] FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \, 3.12 Page Mode

EPSON	TITLE	TM-T88IIIseries	SHEET	NO.
			REVISION
		Specification
				NEXT	SHEET
		(STANDARD)	B
				94	93