Confidential
①GS V m ② GS V m n
[Name] | Select cut mode and cut paper |
| |||
[Format] | ① ASCII | GS | V | m |
|
| Hex | 1D | 56 | m |
|
| Decimal | 29 | 86 | m |
|
| ② ASCII | GS | V | m | n |
| Hex | 1D | 56 | m | n |
| Decimal | 29 | 86 | m | n |
[Range] | ① m = 1, 49 |
|
|
|
|
②m = 66, 0 ≤ n ≤ 255
[Description] Selects a mode for cutting paper and executes paper cutting. The value of m selects the mode as follows:
mPrint mode
1, 49 | Partial cut (one point left uncut) |
66Feeds paper (cutting position + [n ⋅ (vertical motion unit)]), and cuts the paper partially (one point left uncut).
[Details for ① and ②]
•This command is effective only processed at the beginning of a line.
[Details for ①]
•Only the partial cut is available; there is no full cut.
[Details for ②]
•When n = 0, the printer feeds the paper to the cutting position and cuts it.
•When n ≠ 0, the printer feeds the paper to (cutting position + [n ⋅ vertical motion unit]) and cuts it.
•The horizontal and vertical motion unit are specified by GS P.
•The paper feed amount is calculated using the vertical motion unit (y). However, the value cannot be less than the minimum horizontal movement amount, and it must be in even units of the minimum horizontal movement amount.
EPSON | TITLE |
| SHEET | NO. |
|
| REVISION |
|
| ||
| Specification |
|
|
| |
|
| NEXT | SHEET | ||
| (STANDARD) | B | |||
|
|
|
| 128 | 127 |