Epson T88III specifications ESC T n, Esc $ , Esc L , Esc W , Esc \ , Gs $ , Gs P , Gs

Confidential

ESC T n

[Name]	Select print direction in page mode
[Format]	ASCII		ESC	T	n
	Hex		1B	54	n
	Decimal		27	84	n
[Range]	0 ≤	n ≤ 3	51
	48 ≤	n ≤

[Description] Selects the print direction and starting position in page mode. n specifies the print direction and starting position as follows:

n	Print Direction	Starting Position	A
0, 48	Left to right	Upper left		D
		(A in the figure)
1, 49	Bottom to top	Lower left
		(B in the figure)		Print area
2, 50	Right to left	Lower right
		(C in the figure)
3, 51	Top to bottom	Upper right
		(D in the figure)	B	C

Forward

[Details]	•	When the command is input in standard mode, the printer executes only internal flag
		operation. This command does not affect printing in standard mode.
	• This command sets the position where data is buffered within the printing area set by ESC W.
	•	Parameters for horizontal or vertical motion units (x or y) differ as follows, depending on the
		starting position of the printing area:

①If the starting position is the upper left or lower right of the printing area, data is buffered in the direction perpendicular to the paper feed direction:

Commands using horizontal motion units: ESC SP, ESC $, ESC \

Commands using vertical motion units: ESC 3, ESC J, GS $, GS \

②If the starting position is the upper right or lower left of the printing area, data is buffered in the paper feed direction:

Commands using horizontal motion units: ESC 3, ESC J, GS $, GS \

	Commands using vertical motion units: ESC SP, ESC $, ESC \
[Default]	n = 0
[Reference]	ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \

EPSON	TITLE	TM-T88IIIseries	SHEET	NO.
			REVISION
		Specification
				NEXT	SHEET
		(STANDARD)	B
				97	96