Epson T88III specifications GS P x y

Confidential

GS P x y

[Name]	Set horizontal and vertical motion units
[Format]	ASCII		GS	P	x	y
	Hex		1D	50	x	y
	Decimal 29			80	x	y
[Range]	0 ≤	x ≤	255
	0 ≤	y ≤	255

[Description] Sets the horizontal and vertical motion units to approximately 25.4/x mm { 1/x inches} and approximately 25.4/y mm {1/y inches}, respectively.

	When x and y are set to 0, the default setting of each value is used.
[Details]	• The horizontal direction is perpendicular to the paper feed direction and the vertical direction
	is the paper feed direction.
	• In standard mode, the following commands use x or y, regardless of character rotation
	(upside-down or 90° clockwise rotation):
	① Commands using x: ESC SP, ESC $, ESC \, FS S, GS L, GS W
	② Commands using y: ESC 3, ESC J, GS V
	• In page mode, the following command use x or y, depending on character orientation:
	① When the print starting position is set to the upper left or lower right of the printing area
	using ESC T (data is buffered in the direction perpendicular to the paper feed direction):
	Commands using x: ESC SP, ESC $, ESC W, ESC \, FS S
	Commands using y: ESC 3, ESC J, ESC W, GS $, GS \, GS V
	② When the print starting position is set to the upper right or lower left of the printing area
	using ESC T (data is buffered in the paper feed direction):
	Commands using x: ESC 3, ESC J, ESC W, GS $, GS \
	Commands using y: ESC SP, ESC $, ESC W, ESC \, FS S, GS V
	• The command does not affect the previously specified values.
	• The calculated result from combining this command with others is truncated to the minimum
	value of the mechanical pitch.
[Default]	x = 180, y = 360

[Reference] ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC \, GS $, GS L, GS V, GS W, GS \

EPSON	TITLE	TM-T88IIIseries	SHEET	NO.
			REVISION
		Specification
				NEXT	SHEET
		(STANDARD)	B
				127	126