Epson T88III specifications 130 129

Confidential

•If the width set for the printing area is less than the width of one character, when the character data is developed, the following processing is performed:

①The printing area width is extended to the right to accommodate one character.

	Printable area
		A
Left margin			Extended to right

Printing area width set by nL and nH

②If the printing area width cannot be extended sufficiently, the left margin is reduced to accommodate one character.

Printable area

		A
Left margin	② Reduce left margin	① Extended to right

③If the printing area width cannot be extended sufficiently, the right space is reduced.

•If the width set for the printing area is less than one line in vertical, the following processing is performed only on the line in question when data other than character data (e.g., bit image, user-defined bit image) is developed:

①The printing area width is extended to the right to accommodate one line in vertical for the bit image within the printable area.

②If the printing area width cannot be extended sufficiently, the left margin is reduced to accommodate one line in vertical.

•The commands which set the printing area width for bit image printing and its minimum widths are as follows:

•Bit image (ESC ∗ ):

Single density mode = 2 dots

Double density mode = 1 dot

•Downloaded bit image (GS /):

Double width mode or Quadruple mode = 2 dots

Normal mode or Double-height mode = 1 dot

•NV bit image (FS p):

Double width mode or Quadruple mode = 2 dots

Normal mode or Double-height mode = 1 dot

•Raster bit image (GS v 0):

Double width mode or Quadruple mode = 2 dots

Normal mode or Double-height mode = 1 dot

[Default] nL = 0, nH = 2

[Reference] GS L, GS P

EPSON	TITLE	TM-T88IIIseries	SHEET	NO.
			REVISION
		Specification
				NEXT	SHEET
		(STANDARD)	B
				130	129