Epson T88III specifications Panel LED Indicators, Standby State Indication

Confidential

3.4 Panel LED Indicators

1) Power (POWER) LED: Green

On:	Power is stable.
Off:	Power is not stable.

2) Paper roll end (PAPER OUT) LED: Red

On:	The paper roll near end is detected.
Off:	Paper is loaded (Normal condition)

Blinking: • Self-test standby state (refer to Section 3.5.3) or macro standby state

•Macro execution standby state when the macro execution command is used.

Table 3.4.1 Standby State Indication

State	PAPER LED Blinking Pattern		Recovery Conditions
Waiting for self-test printing	PAPER OUT		Pressing the FEED button
to be continued or macro		Approximately 320 ms	causes self-test printing to be
execution ready state.			continued or executes the
			macro.

NOTE: A macro can be executed r times (r specifies the number of times to execute the macro) within the specified definition range. The macro can be executed continuously or can be executed by pressing the button. If the macro is executed by pressing the FEED button, the PAPER OUT LED blinks to indicate the macro execution ready state. (See Section 6, Commands.)

3) Error (ERROR) LED: Red

On:	Offline (except during paper feeding using the FEED button and during test printing,
	and the error state). (refer to Section 2.1.1.2, Switching between online and offline)
Off:	Normal condition

Blinking: Error (refer to Section 3.7)

Figure 3.4.1 Panel Switches and Indicators

TITLE

TM-T88IIIseries

SHEET	NO.
REVISION

EPSON Specification (STANDARD)

B	NEXT	SHEET
	56	55