Confidential
EPSON
TITLE SHEET
REVISION NO.
SHEETNEXT
146 145
TM-T88III series Specification (STANDARD) B
6.4 Kanji Control Commands
(for Japanese model, Simplified Chinese model, Traditional Chinese model, and Korean model)
FS ! n [Name] Set print mode(s) for Kanji characters
[Format] ASCII FS ! n
Hex 1C 21 n
Decimal 28 33 n
[Range] 0
≤ n ≤ 255
[Description] Sets the print m ode for Kanji characters, using n as follows:
Bit Off/On Hex Decimal Function
0 - - - Undefined.
1 - - - Undefined.
2 Off 00 0 Double-width mode is OFF.
On 04 4 Double-width mode is ON.
3 Off 00 . Double-height mode is OFF.
On 08 8 Double-height mode is ON.
4 - - - Undefined.
5 - - - Undefined.
6 - - - Undefined.
7 Off 00 0 Underline mode is OFF.
On 80 128 Underline mode is ON.
[Notes] • When both double-width and double-height modes are set (including right- and left-side
character spacing), quadruple-size characters are printed.
• The printer c an underline all characters (including right- and left-side character spacing), but
cannot underline the space set by HT and 90° clockwise-rotated characters.
• The thick ness of the underline is that specified by FS −
−−
−, regardless of the character size.
• W hen some of the characters in a line are double or more height, all the characters on the
line are aligned at the baseline.
• It is possible to em phasize the Kanji character using FS W or GS !, the setting of the last
received command is effective.
• It is possible to turn under line mode on or off using FS −
−−
−, and the setting of the last received
command is effective.
[Default] n = 0
[Reference] FS −
−−
−, FS W, GS !