Epson T88III specifications FS − n

Confidential

FS − n

[Name]	Turn underline mode on/off for Kanji characters
[Format]	ASCII	FS	−	n
	Hex	1C	2D	n
	Decimal	28	45	n
[Range]	0 ≤ n ≤ 2, 48 ≤		n ≤ 50

[Description] Turns underline mode for Kanji characters on or off, based on the following values of n.

	n	Function
	0, 48	Turns off underline mode for Kanji characters
	1, 49	Turns on underline mode for Kanji characters (1-dot thick)
	2, 50	Turns on underline mode for Kanji characters (2-dot thick)
[Notes]	• The printer can underline all characters (including right- and left-side character spacing), but
	cannot underline the space set by HT and 90° clockwise-rotated characters.
	• After the underline mode for Kanji characters is turned off by setting n to 0, underline printing
	is no longer performed, but the previously specified underline thickness is not changed. The
	default underline thickness is 1 dot.
	• The specified line thickness does not change even when the character size changes.
	• It is possible to turn underline mode on or off using FS !, and the last received command is
	effective.
[Default]	n = 0
[Reference]	FS !

EPSON	TITLE	TM-T88IIIseries	SHEET	NO.
			REVISION
		Specification
				NEXT	SHEET
		(STANDARD)	B
				148	147