Epson T88III specifications Paper Roll Printable Area

Confidential

1.6 Printable Area

1) Paper roll

The printable area of a paper with width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ± 0.008"} (512 dots) and the space on the right and left sides are approximately

3.7 ±2 mm {0.15 ± 0.079"}.

a

b

c

a = 79.5 ± 0.5 mm {3.13 ± 0.02"}

b = 0.141 ± 0.05 mm {0.056 ± .002"} c = 72.2 ± 0.2 mm {2.84 ± .008"}

d = 3.7 ± 0.2 mm {0.15 ± 0.079"} e = 3.7 ± 0.2 mm {0.15 ± 0.079"} [All the numeric values are typical.]

d e

Figure 1.6.1 Paper Roll Printable Area

1256

257512

Approximately 0.07mm (0.0028")

Figure 1.6.2 Shifting of the Print Position

NOTE: The print position within the printable area of the thermal elements for dots 257 to 512 is shifted approximately 0.07 mm {0.003"} in the paper feed direction from the position for dots 1 to 256. Be sure not to print a ladder bar code across both printable areas, as this can cause variations in printing which are difficult to read. However, when the ladder bar code is printed with level 2 of print density, the difference is only approximately 0.04 ∼ 0.05 mm

{0.0015∼ 0.0019"}.

TITLE

TM-T88IIIseries

SHEET	NO.
REVISION

EPSON Specification (STANDARD)

B	NEXT	SHEET
	6	5