Installing Modules and Connecting Cables

Figure 70: Captive Screw on a BlackDiamond 12800 Blank Front Panel

ASP019

3Remove the blank front panel from the intended slot on the BlackDiamond switch (see Figure 71).

Figure 71: Removing a Blank Front Panel from a BlackDiamond 12800 Series Switch

ASP020

4Install an I/O module or MSM in the open slot as described in “Installing a BlackDiamond 12800 Series Module” on page 102 or “Installing a Backup MSM” on page 105.

NOTE

Leave the ESD-preventive wrist strap permanently connected to the switch, so that the strap is always available when you need to handle ESD-sensitive components.

110

BlackDiamond 12800 Series Switches Hardware Installation Guide

 

 

Page 110
Image 110
Extreme Networks 12804, 12802 manual Captive Screw on a BlackDiamond 12800 Blank Front Panel