Rack-Mounting the BlackDiamond 12804 Chassis

Figure 31: Attaching the 19-inch Helper Bracket to the System Rack

EX_086A

4Lift the back of the empty BlackDiamond 12804 chassis onto the helper bracket.

5Slowly guide the chassis into the system rack until the mounting brackets are flush against the rack uprights.

6Attach the chassis to the system rack using eight rack mounting screws. (Screws are not provided.) Be sure that the screws are secure. Refer to Figure 32 for the screw locations.

NOTE

Figure 32 shows a standard rack mount. For mid-mount installation, use the same mounting locations shown in the figure, but insert the screws through the designated slot locations of the mid-mount brackets.

BlackDiamond 12800 Series Switches Hardware Installation Guide

63

 

 

Page 63
Image 63
Extreme Networks 12802, 12804 manual Attaching the 19-inch Helper Bracket to the System Rack