Installing Power Supply Units
NOTE
On each two vertically adjacent PSUs, attach the power cord bracket with the tightening screw on top and the lower power cord bracket with the tightening screw underneath, as shown in Figure 60.
Figure 60: Power Cord Brackets on Two Adjacent Power Supplies
Torino AC PSU_09
2Connect the AC power cord to the PSU as follows:
a Connect the AC power cord to the AC input on the front of the PSU (see Figure 61). If needed, loosen the middle screw of the power cord bracket to allow installation of the power cord.
b After the power cord is connected, tighten the middle screw of the bracket to secure the power cord in place (see Figure 61).
Figure 61: Connecting the AC Power Cord
1 | 2 |
Torino AC PSU_08
3Connect the opposite end of the AC power cord to the wall outlet.
NOTE
Leave the ESD strap permanently connected to the switch, so that the strap is always available when you need to handle
98 | BlackDiamond 12800 Series Switches Hardware Installation Guide |
|
|
