BlackDiamond 12800 Series Modules

XM-2HR I/O Module

Figure 13 shows the XM-2HR I/O module.

Figure 13: XM-2HR I/O Module

Mini-GBIC fiber ports

Module status

10 Gbs ports

LEDs

10/100/1000BASE-T ports

BD_167

The XM-2HR I/O module has 10 SFP ports and 10 autosensing 10/100/1000BASE-T ports that use standard RJ-45 connectors. In addition, it has one unpopulated XENPAK-based 10-Gigabit Ethernet port.

The default configuration of the XM-2HR I/O module is as follows. All ports:

Are added to the default VLAN as untagged.

Inherit the properties of the default VLAN (for example, protocol type and VLANid).

In addition, the 10/100/1000BASE-T ports and SFP ports operate in autonegotiation mode.

XM-2HR LEDs

The XM-2HR I/O module has the following LEDs:

Module status

Module diagnostics

Port status

28

BlackDiamond 12800 Series Switches Hardware Installation Guide

 

 

Page 28
Image 28
Extreme Networks 12804, 12802 manual XM-2HR I/O Module, XM-2HR LEDs