Extreme Networks Power Supply Units for BlackDiamond Switches

Fuse

The Extreme Networks 325 W DC PSU line is fused. This fuse is not replaceable in the field. In the event of failure, immediately return the Extreme Networks 325 W DC PSU for a complete replacement.

WARNING!

Field operators must not attempt to configure or replace fuses inside Extreme Networks 325 W DC PSUs! In the event of failure, immediately return the defective Extreme Networks 325 W DC PSU for a complete replacement.

Specifications

The 325 W DC PSU functions from 40 V to –72 V DC input. The software determines the maximum available power required for the switch and enables the modules accordingly.

CAUTION

The 325 W DC PSU does not have a switch for turning the unit on and off. Remove DC power by de-energizing the DC power circuit.

CAUTION

Make sure that the 325 W DC PSU circuit is not overloaded. Use proper over-current protection, such as a circuit-breaker, to prevent over-current conditions.

Extreme Networks 325 W AC Power Supply

Figure 19 shows the Extreme Networks 325 W AC UL-listed accessory power supply unit, Model 65021. This power supply is compatible with the BlackDiamond 12802 switch.

Figure 19: Extreme Networks 325 W AC PSU

325W AC PSU

Torino AC PSU_04

36

BlackDiamond 12800 Series Switches Hardware Installation Guide

 

 

Page 36
Image 36
Extreme Networks 12804, 12802 manual Extreme Networks 325 W AC Power Supply, Extreme Networks 325 W AC PSU