Replace the seven system board screws you removed in Step 9. Follow the instructions in “Installing memory” on page 66. Follow the instructions in “Installing a processor” on page 82.
12 Insert the new system board into the case, then slide the board toward the back of the case so the board is held under the system board guides.
13
14
15
16
17 Reinstall the PCI riser assembly by following the instructions in “Removing and installing the PCI riser assembly” on page 69.
18
19 Turn on your server, then press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.
www.gateway.com | 105 |