Gateway 9415 LED information, Additional beep codes provided by optional Intel Management Modules, Color, LED Name, Function, Location, Beep Codes, Description

Additional beep codes provided by optional Intel Management Modules

In addition to the preceding beep codes, the following additional beep codes are provided if an Intel Management Module is installed:

Beep Codes	Description
1	Control panel CMOS clear has been initiated
1-5-1-1	Processor failure. Reseat or replace the failed processor.
1-5-2-1	No processor is installed or the CPU 1 socket is empty.
	Reseat or replace the failed processor.
1-5-2-3	Processor configuration error or CPU 1 socket is empty.
	Reseat or replace the failed processor. In a
	two-processor system, make sure the processors are
	identical.
1-5-2-4	Front-side bus select configuration error.
1-5-4-2	DC power unexpectedly lost.
1-5-4-3	Chipset control failure.
1-5-4-4	Power control failure.

LED information

The system board in this server includes LEDs that can assist you in troubleshooting your system. See the following table for a description of these LEDs and the information they provide:

LED Name	Function	Location	Color	Description
ID	Aid in server	Front panel and	Blue	On = Server identification
	identification	left back of		enabled
		system board
System Fault	Visible fault	Front panel and	Green or	■ On = No fault
	warning	left back of	Orange	■ Green blink = Degraded
		system board		■ Orange = Critical error or
				non-recoverable
				■ Orange blink = Non critical
ATA drive	Indicate drive	Front panel and	Green	Blinking = Drive active
activity	activity	left side of
		system board

126 www.gateway.com