Follow the instructions in “Closing the server case” on page 44.
6 Find the IMM connector on the left back portion of the system board.

IMM connector

Hole for standoff

7 Grasp the module by the edges, close to the mounting connector, align the module with the IMM connector on the system board, then gently apply pressure to seat the module.

Caution Exercise extreme caution when installing the IMM module. The module is fragile and can be damaged easily.

Make sure the module is fully seated and the nylon standoff is inserted into the corresponding hole in the system board.

8 Replace the riser assembly by following the instructions in “Removing and installing the PCI riser assembly” on page 69.

9

10 Following the installation of a new IMM module, reinstall the GSM software (supplied on a CD with your server) and update the FRU/SDR (see “Updating the FRU/SDR” on page 37). When you subsequently reboot your server, the GSM software will take over management of the server.

www.gateway.com

87