
Updating the BIOS
If you need a new version of the BIOS, you can download the BIOS update from Gateway, then install the new version from a diskette.
To update the BIOS:
1
2 Restart your server, then press F2 when the Gateway logo screen appears during startup.
3
4
5
6 Enter any custom BIOS settings you recorded in Step 3, then save your changes and close the BIOS Setup utility.
Rolling BIOSThe BIOS flash memory of this server is divided into two partitions: a primary (active) partition from which the server boots, and a secondary partition to which BIOS updates are diverted. When a BIOS update occurs, the existing BIOS image is preserved on the primary partition and the system is automatically prompted to attempt to boot from the new BIOS (on the secondary partition). If a boot failure occurs with the new BIOS, the system will revert to the old BIOS on the other partition.
To manually select the BIOS boot partition:
1 Turn off the server, then disconnect the power cords and all other cables connected to the server.
2 Follow the instructions in “Opening the server case” on page 42.
Caution Moving the jumper while the power is on can damage your server. Always turn off the server and unplug the power cords and all other cables before changing the jumper.
www.gateway.com | 109 |