www.gateway.com
Follow the instructions in “Closing the server case” on page 44.
Place the jumper back onto pins B1-B2.
Follow the instructions in “Opening the server case” on page 42.
9
10
11
12 Plug in the AC power cords and turn on the server, then verify that the recovery was successful.
While the BIOS is being recovered, the monitor displays a blue screen and the server will beep continually. The process is complete when the server stops beeping.
7 Remove the bootable USB “disk-on-key.”
8 Turn off the server, then disconnect the power cords and all other cables connected to the server.
Insert a bootable USB “disk-on-key” containing a valid BIOS image into a USB port. Reconnect the power cords and turn on the server. The BIOS recovery is initiated.
5
6

112