Removing the power supply air duct
Your server is equipped with a power supply fan module and a power supply air duct to direct the airflow and ensure proper cooling.
Caution To ensure continued, reliable operation, always operate your server with the appropriate air ducts and air dams in place. Failure to do this could result in equipment damage.
To remove the power supply air duct:
1 Follow the instructions in “Preventing static electricity discharge” on page 41. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server.
2
3
4
Follow the instructions in “Opening the server case” on page 42.
Move cables out of the way.Unscrew the phillips screw holding the power supply air duct in place.5 Pull up on the air duct to remove it from the server chassis.
www.gateway.com | 49 |