8 Line up the screws on the riser assembly with the slot and large hole in the replacement PCI riser connector.

9 Press and hold the blue riser locking lever, then place the PCI riser connector onto the retention pins.

10 Slide the PCI riser connector toward the right to lock it into place, then release the blue lever.

11

12 Replace the PCI riser assembly by following the instructions in “Removing and installing the PCI riser assembly” on page 69.

13

14

Follow the instructions in “Closing the server case” on page 44.

See the card’s documentation for software installation instructions.

Removing and installing a PCI expansion card

To remove and install a PCI expansion card:

1 Follow the instructions in “Preventing static electricity discharge” on page 41. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server.

2

3

Follow the instructions in “Opening the server case” on page 42.

Disconnect any cables that are attached to the card you are removing.

www.gateway.com

73