Follow the instructions in “Closing the server case” on page 44.

7 Locate the old battery on the system board and note its orientation. You will need to install the new battery the same way.

CMOS battery

8 Push the battery retention clip away from the battery until the battery lifts up, then remove the old battery. You can use a screwdriver to help lift the battery.

9 Make sure that the positive (+) side of the new battery is facing up, then press the new battery into the socket until it snaps into place.

10 Replace the PCI riser assembly by following the instructions in “Removing and installing the PCI riser assembly” on page 69.

11

12 Turn on your server, then press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.

13

14

Restore any BIOS settings that you wrote down in Step 3.

Save all your settings and close the BIOS Setup utility.

96

www.gateway.com