Preparing to install components

Selecting a place to workWork on your server in an area that:■Is clean (avoid dusty areas).■Is a low-static environment (avoid carpeted areas).■Has a stable surface on which to set your server.■Has enough room to place all of your server parts.■Is near a grounded outlet so you can test your server after installation.

■Is near a telephone (in case you need help from Gateway Customer Care). The telephone must be directly connected to a telephone jack and cannot be connected to your server.

Gathering the tools you needSome tools and supplies that you may need to work on your server are:■A notebook to take notes■A Phillips screwdriver■A small flat-blade screwdriver■Small containers to store various types of screws■A grounding wrist strap (available at most electronic stores)

Tips & Tricks Blue latches, thumbscrews, or connectors indicate tool-less components.

Green latches and connectors indicate hot-swappable components.

Getting Help

If you have questions about performing any of these procedures, contact Gateway Customer Care. For more information, see “Getting Help” on page 8.

40

www.gateway.com