Power supply LED
4 Pull the power supply module straight out of the server with the handle.
5 Insert the new power supply module into the server, with the green locking lever to the left, until it locks into place, then fold the handle flat.
6 Reconnect the AC power cord for the new power supply module.
7 If you added a redundant power supply module, see “Updating the FRU/SDR” on page 37.

3 Fold out the handle and push the green locking lever to the right to release the power supply module from the chassis (front or back, whichever is applicable).

Locking lever

Handle

 

www.gateway.com

89