
5
6
If partitions are defined on this disk, a message warns you that data on the disk will be lost when the mirrored volume is created. Press Delete to confirm erasing data from the disk, or press any other key to deselect the disk. Continue with Step 5.
(Optional) Use the arrow keys to select a hot spare disk for the IM volume. Select Yes as the value for the Hot Spare column.
When you have selected all disks for the IM volume, press ESC and select Save changes, then exit this menu. (If you do not want to create the IM volume, select Discard changes, then exit this menu.)
The IM volume exists as soon as you save the changes. The RAID Properties screen now displays the IM volume properties and status.
Integrated Striping configuration
The following must be considered when configuring the onboard SCSI RAID solution for Integrated Striping:
■The
■An IS volume can have two or three disks.
■Disks in an IS volume must be
■Disks of different size are allowed in IS volumes, but the smallest disk determines the “logical” size of each disk in the volume. The excess space of larger member disks is not used.
■Usable disk space for each IS member disk is adjusted down to leave room for Meta data. Usable disk space may be further reduced to maximize the ability to interchange disks in the same size classification.
■The supported stripe size is 64 Kb.
To configure the onboard SCSI RAID solution for Integrated Striping:
1 Open the BIOS Setup utility as described in the previous procedure.
2 On the Main menu screen, use the arrow keys to select an adapter, then press ENTER. The Adapter Properties screen opens.
3 Use the arrow keys to select RAID Properties, then press ENTER. The RAID Properties screen opens.
64 | www.gateway.com |