Replacing the CMOS battery
If the server clock does not keep time or the settings in the BIOS Setup utility are not saved when you turn off the server, replace the CMOS battery with an equivalent battery.
Warning Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of or recycle used batteries by taking them to a hazardous waste facility. Follow all local regulations for correct battery disposal.
To replace the battery:
1
2 Restart your server, then press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.
3
4 Turn off your server, then follow the instructions in “Preventing static electricity discharge” on page 41.
5
6 Remove the PCI riser assembly by following the instructions in “Removing and installing the PCI riser assembly” on page 69.
www.gateway.com | 95 |