Mounting your server into a cabinet

The cabinet mounting hardware included with your server should be used with standard 4-post cabinets that have front and back vertical posts. If your cabinet is a different type, obtain mounting hardware from the cabinet manufacturer.

Caution Before attaching cabinet accessories, make sure that the server is turned off and all power cords are unplugged.

Caution The cabinet must provide sufficient airflow to the front of the server to maintain correct cooling.

Rackmount kit contents:■Server rails (2)■Cabinet rails (2)■L brackets (2, not used for this type of installation)■Fastener pack (1)■Small screws (4, #6-32 × 3/16-inch)■Medium screws (8, #10-32 × ½-inch)■Large screws (2, #10-32 × 7/8-inch)■Disk guides (2)■Handle spacers (2)■Nut bars (4)

12

www.gateway.com