Remove the four screws securing the rails to the carrier, then remove the rails.
www.gateway.com
Drive carrier
8 Disconnect the 44-pin CD drive cable from the back of the interposer board.
9 Pull up on the top of the connector on the back of the CD or DVD drive and remove the flat flex cable.
5 Disconnect the data and power cables from the interposer board.
6 Push in on the blue lever at the back of the drive carrier to release the drive carrier from the drive bay, then slide the drive carrier out through the front of the server.
7 Press down on the side of the drive carrier to release the drive from the carrier.
Interposer board
Screws | CD or DVD drive |
10
57