Henny Penny FM05-061-A manual Changing standard settings, Set service interval water volume

SmartCombi ™

Operation

NOTICE

The end-of-step signal is activated as default for the last cooking step of a program.

1.Press the left select button (13) when entering a cooking program.

2.Select the end-of-step signal with CombiDial (9).

3.Press the left select button (13) to return to the settings menu.

4.12Changing standard settings

Requirements Unit is switched on

1.Press the left select button (13) to open the menu.

2.Use CombiDial (9) to select the “Settings” menu.

3.Use CombiDial (9) to enter the password “111”.

4.Press Star t/Stop (8).

5.Select the parameter with CombiDial (9).

The multi-function display (4) shows the set value.

The parameter name flashes.

6.Press CombiDial (9), to change the value. The parameter value flashes.

7.Change the value with CombiDial (9).

8.Press the right select button (6) or CombiDial (9) to adopt the value.

The parameter name flashes.

9.Change other parameters as necessary.

10.Press the right select button (6) to save the changes.

or

→ Press the left select button (13) to discard the changes.

4.12.1Set service interval water volume

In the “Settings” menu, you can specify the service interval by means of the volume of used water.

1.Press the left select button (13) to open the menu.

2.Use CombiDial (9) to select the “Settings” menu.

Operating manual 57

Global Foodservice Solutions