HP 1020 Fax, 1020xi Fax Sending a Fax, Standard method

hp fax 1020 series

Sending a Fax

You can send a fax using several methods.

•Standard method—scans and sends each page

•Scan and fax—scans all of the pages before starting to send. This is very useful for multiple page faxes so that you can determine that all pages are scanned properly before sending starts.

•Send later—sends a fax at a later time; for example, when rates are lower.

•Sending to multiple numbers—sends a fax to everyone on a broadcast list

If the call is not completed, the fax will make 2 redial attempts at 3 minute intervals.

Standard method

1Place the document to be sent face down in the document tray.

2Dial the number by:

•Using the number pad and pressing the Start/Copy button.

•Touching a One Touch button.

•Pressing Speed Dial and entering a speed dial code and pressing Start/Copy.

Note: One touch buttons and speed dial codes must have been previously programmed.

￿￿￿￿￿￿￿￿#￿￿￿￿￿￿&￿￿￿￿￿￿￿&￿￿￿￿6￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿7￿￿If you need to listen to the tones (as when using a calling card), simply pick up the handset or press the Speakerphone button before dialing. After dialing the fax number, then press Start/Copy.

34