HP Deskjet 6800 series printer
Note: The Auto
12.3.1Installing the Auto
Tray
Use these steps to install the Auto
1.Push the two latch handles on the printer rear access door toward each other, and then remove the door.
Do not discard the rear access door. In order to print, the accessory or the rear access door must be attached to the printer.
2. Insert the accessory into the back of the printer until both sides snap into place.
Note: Do not press the buttons on either side of the accessory when installing it into the printer. Use the buttons only when removing the accessory from the printer.
177