HP Book 6000 Replacing Small Parts User-Replaceable, Replacement Procedure, Cover, Sdram

Replacing Small Parts

(User-Replaceable)

The user can replace the following small parts.

Part

Cap, pointing stick

Bumpers, display (on display bezel)

Cover, mini-PCI

Table 2-7. Replacing Small Parts (User-Replaceable)

Replacement Procedure

Pull the cap off the pointing stick.

Insert a small flat-blade screwdriver under the bumper and pry it loose. To replace, firmly press the adhesive side of the bumper into the recess.

On the bottom of the computer, loosen the screw in the mini-PCI cover (the cover retains the screw) and remove the cover.

Cover, SDRAM

On the bottom of the computer, loosen the screw in the SDRAM module cover (the cover retains the screw) and remove the cover.

Covers, screw (on display bezel)

Covers, left/right corner

Feet, rubber (on bottom of unit)

Insert a small flat-blade screwdriver under the cover and pry it loose. To replace, firmly press the adhesive side of the cover into the recess.

From the bottom of the computer, remove the screws holding the corner covers, then remove the covers.

Insert a small flat-blade screwdriver under the foot and pry it loose. To replace, firmly press the adhesive side of the foot into the recess.

2-12 Removal and Replacement HP OmniBook 6000