HP Book 6000 manual System Devices Menu Default, Security Menu Default

System Devices Menu		Default
PS/2 Pointing Devices	Disables the internal pointing devices when an external PS/2	Auto
	mouse is connected.
External Fn Key	Sets whether left CTRL+left ALT on an external keyboard is	Enabled
	interpreted as the Fn key.
IDE Controller	Enables the primary (hard drive) and secondary (module bay	Both
	device) controllers.
FDD Controller	Enables the floppy drive.	Enabled
Serial Port	Sets whether the serial port is active, and whether it is	Enabled
	configured automatically or by the user.
Base I/O address	Sets the I/O address and interrupt.	3F8h, IRQ4
IrDA Port	Sets whether the infrared port is active, and whether it is	Disabled
	configured automatically or by the user.
Mode	Sets the hardware to support FIR (Fast IR) or SIR (Standard	FIR
	IR) infrared communications. (Driver installation required for
	Windows 95.)
Base I/O address	Sets the I/O address and interrupt.	2F8h, IRQ3
DMA channel	Sets the DMA channel for Fast IR (FIR) mode.	DMA0
Parallel Port	Sets whether the parallel port is configured by the user or the	Enabled
	BIOS or OS (automatically), or not at all.
Mode	Sets the port to output only, bi-directional, EPP, or ECP.	ECP
Base I/O address	Sets the I/O address.	378h
Interrupt	Sets the interrupt.	IRQ7
DMA channel	Sets the DMA channel for ECP mode.	DMA3

Security Menu		Default
User Password is	Shows if a user password is set.	Clear
Administrator Password is	Shows if an administrator password is set.	Clear
Set User Password	Press ENTER to set, change, or clear the user password. The	Enter
	password can have no more than 8 characters (0–9,
	A–Z), and cannot include special or accented characters.
Set Administrator	Press ENTER to set, change, or clear the administrator	Enter
Password	password, which protects BIOS Setup settings. The password
	can have no more than 8 characters (0–9, A–Z), and cannot
	include special or accented characters.

Boot

Resume*

Undock*

Internal hard disk drive lock*

Sets whether a user password is required when the computer boots. Requires the administrator password for changes.

Sets whether a user password is required when resuming from Standby or Hibernate mode. Requires the administrator password for changes. (Windows 95 and 98 only.)

Sets whether a user password is required when undocking the computer. Requires the administrator password for changes. (Windows 95 and 98 only.)

Encodes the current user password (or administrator password if that is the only password set) on the hard disk drive.

Enabled

Enabled

Disabled

Disabled

Removable Device Boot	Sets whether the computer will attempt to boot from a floppy	Enabled
	drive or other removable device.

* Resume, Undock, and Internal hard disk drive lock options are available only if the Boot option is enabled.

3-28 Troubleshooting and Diagnostics HP OmniBook 6000